NX8E help

[binks3486]

Hello everyone I am looking for help with the NX8E security system. I am unable to connect to the NX8E serial port even with the P0003 serial cable. I need to know the settings on the keypad needed to get the serial port to send information through the serial port to a Putty Session. Any help would be appreciated. I tried the DL900 software but even that software fails to connect to my NX8E security system.

 

[RAL]

Which serial port are you trying to use?  A serial port via a NX-584 board, or the on-board RS-232 on the NX-8E itself?
 
You need to set up locations 207 and 208 at a minimum. 
 
Here is some further info that might be helpful.
 
http://www.increa.com/reverse/nx-8e/index.html

 

[BraveSirRobbin]

You need to look at THIS thread (especially that second post).

Also, make sure the ASCII and Binary options match up between the NX8E and the DL900.