Panasonic WV-CS854 & Diginet 4.11

[IBKOOOL]

Hi, does anyone have the setup parameters to use the Panasonic WV-CS854 camera with the Diginet 4.11 software? eg. Protocol, baud rate dip switch settings etc. I can’t seem to be able to control the PTZ functions of the camera. There is a setting in the PTZ setup for this particular camera, but they don’t tell you how to set the dip switches on the camera and I can’t seem to find this information anywhere. Any help would be greatly appreciated.
Thanks in advance.

 

[gatchel]

http://service.us.panasonic.com/operman/fi...x?model=WVCS854

Click on the INSTALLATION in the TOC. The dip switch settings are there. Follow the sequence for RS485 setup and then address the camera.

 

[IBKOOOL]

http://service.us.panasonic.com/operman/fi...x?model=WVCS854

Click on the INSTALLATION in the TOC. The dip switch settings are there. Follow the sequence for RS485 setup and then address the camera.

Hi,
Thanks for the info. I havn't had the chance to try it yet, "wife, work, and kids, you know how that goes". I will be sure to post the results as soon as I do.

Thanks again and keep up the good work.