Somfy sonesse rts

[HomeTechNewbie]

Hi guys,

I must be a idiot disclaimer. I have 1 sonesse 30 rts shade and a universal rts interface module To set up with my omnipro.

I am having a world of a problem just setting the shade to communicate to the rts universal interface.
The manuals on line all jump to programming the omnipro which I have done however I have not got Shade (1) to rts interface (2) to omnipro (3)... To work.

I have no clue how to set the shade to a channel and then how to program the rts interface to read that channel.

Make sense? Any help appreciated!

 

[az1324]

Set the RTS receiver or motor into its PROGRAMMING MODE.  (Press and hold the PROGRAMMING BUTTON on the individual RTS
transmitter (handheld remote) that has already been programmed until the window covering jogs: PROGRAMMING MODE is activated for 2 minutes.)
Using the rotary switch, select the channel to be programmed.  Letter A through
F stand for channels 10 through 15, 0 for 16.  Briefly press the PROGRAMMING
BUTTON (1 sec. max.  The window treatment will jog to indicate the channel has
been memorized.
Repeat the steps above for each channel or product to be memorized.
To test the control operation, simply press the UP, STOP or DOWN buttons on the
front of the control.  The window treatment should move appropriately.  The
LED will flash red to indicate the radio signal has been transmitted.
For initial programming provide, power only to the motor or control
being programmed.
!

 

[HomeTechNewbie]

Worked great!  Thanks!