UPB link question

frijoli

Member
Hopefully this is an easy oversight.

I have a US2-40 controlling three devices. One is directly wired(but controlled as a link), the other two are lamp modules.

Here is the issue:
In upstart i have the first direct light (1)come on snap! One of the lamps(2) come on snap!, and one (3)go OFF snap. These are all controlled by the top rocker.

It works in upstart, but the switch won't activate it. the main light (1)comes on but not the module(2). and if the (3) module is on it stays on.

I have 4 links tied to that switch, and the two that are connected to the rocker don't function properly.

I'm sure you'll need more data, but I don't know what yet so please bear with me.

Clay
 
I figured it out guys. I was confused by the link 241 description which says, at least the way I understood it, was that to use the US2-40 a a "listen to yourself device", was that transmit on rocker 1 was to be "off", and I needed it to be on.

Clay
 
Back
Top