Recent content by nmcbride

First a disclaimer: I work for Absolute Automation.   That being said, a Sensaphone 400 with external temperature probe (FGD-0101) can be programmed to monitor the temperature and open/close it's OUTPUT relay out based on conditions. You could also have it call you as a heads up if the...

Hi Linda,   Disclosure: I work for Absolute Automation Inc, which is a Dakota Alert distributor.   That being said, a couple of quick suggestions:   1. If you decide to go with the Dakota Alert, definitely go to the 2500 line. The 3000 has been discontinued, has a weaker transmitter and is...

Hello dos46, the 1.25A PTC is per output, none of the individual outputs can exceed 1.25A, also yes 1.25A is the same as 1,250mA.

Hi BraveSirRobbin, I think I've fixed that. Thanks!

Just wanted to say thanks for this thread! Just used it worked great.

HI there, it is LOOP1 for the LP1. The manual for the 6022 states that by enabling Option2 in the wireless enrollment I could use NO sensors as opposed to the NC sensors. I have a new 6022 on the way now from ELK so I can test it out and let you know how it works.

Hey everyone, I'm having a heck of a time getting my 6022 to trigger a rule in my ELKRP2 software using an NO sensor on the LP1 contacts. I have the sensor enrolled, the reed switch activates its rule as it should. I than enrolled the sensor again in the next zone selecting LOOP1, enabling...

Hi, yes it is a very new unit. Any way of telling if its on the new protocol by the model number etc?

Just an update on this. The PLM's RF is definitely working as I can send "ON" commands to an Insteon thermostat, the powerline signals are also working as I can turn one of the new Insteon LED bulbs, ON, OFF and even DIM using the mykeypad app through my M1. However I still cannot get the...

Hi I was wondering if anyone has tried controlling an the 2441TH Thermostat via a PLM and the M1XSP? How much (if any) control could I actually have over the thermostat? Thanks!

Hi, thanks for the response. Has anyone ever heard of the PLM themselves being bad? I'm able to linc my ApplianceLinc to an I/OLinc I have, just not to the PLM?

Hi everyone, I'm still just getting going with my M1 and now starting to add Insteon devices. I have the M1XSP enrolled and the appropriate firmware (it seems anyways) installed. When I turn light # 256 ON using my M1 keypad my PLM module begins flashing. However when I attempt to connect the...

Hi just so everyone one knows I've got the app working and the developer (Stan) was helpful.

That sounds excellent. Do you know if the developer has or is considering an Android app? I've noticed the wall mounts for the iPad, Android tablets will likely never have the same plethora of options due to the variations in sizes, dimensions etc.

HI guys, thanks for the updates. I've contacted the developer and he did get back to me asking me to send him a log from the app. So we'll see how that goes. I work for Absolute Automation which is just getting into becoming an ELK distributor, so I'm really hoping to have a "WOW" factor app on...