Spanky
FYI, I have the latest 4.3.12 and 1.6.6 running and here is the problem that I'm running into and don't know why.
Using Zone #54 to monitor my external power supply if I lose AC power.
Attributes of zone #54 (32=power supervisory; Normally Open)
Connect zone #54 to my external power supply N/O terminals
I've written this simple rule and the results are:
It doesn't call my cell phone on both AC power remove and restore
Nothing display on the keypad on AC power remove
Elk RM shows zone #54 as RED when AC power removed (proper indication)
Whenever Power Supv Zn-AC Trouble
Then Dial xxx-xxx-xxxx and Announce xxxxxxx
Whenever Power Supv Zn-AC Trouble Restore
Then Dial xxx-xxx-xxxx and Announce xxxxxx
************************************************
SO NOW I TRIED the rules below and the results are:
It calls my cell phone when AC power is removed
It calls my cell phone when AC power is restored
Elk RM shows zone #54 as RED when AC power is removed (proper indication)
Nothing display on the keypad when zone #54 becomes NOT secure
When zone #54 becomes secure THEN SUDDENLY "AC FAILURE" message is display on the keypad AND the only way to clear it is to cycle the power to the alarm panel
Whenever Zone #54 Becomes Not Secure
Then Dial xxx-xxx-xxxx and Announce xxxxxxxx
Whenever Zone #54 Becomes Secure
Then Dial xxx-xxx- and Announce xxxxxxxx
PLEASE HELP
FYI, I have the latest 4.3.12 and 1.6.6 running and here is the problem that I'm running into and don't know why.
Using Zone #54 to monitor my external power supply if I lose AC power.
Attributes of zone #54 (32=power supervisory; Normally Open)
Connect zone #54 to my external power supply N/O terminals
I've written this simple rule and the results are:
It doesn't call my cell phone on both AC power remove and restore
Nothing display on the keypad on AC power remove
Elk RM shows zone #54 as RED when AC power removed (proper indication)
Whenever Power Supv Zn-AC Trouble
Then Dial xxx-xxx-xxxx and Announce xxxxxxx
Whenever Power Supv Zn-AC Trouble Restore
Then Dial xxx-xxx-xxxx and Announce xxxxxx
************************************************
SO NOW I TRIED the rules below and the results are:
It calls my cell phone when AC power is removed
It calls my cell phone when AC power is restored
Elk RM shows zone #54 as RED when AC power is removed (proper indication)
Nothing display on the keypad when zone #54 becomes NOT secure
When zone #54 becomes secure THEN SUDDENLY "AC FAILURE" message is display on the keypad AND the only way to clear it is to cycle the power to the alarm panel
Whenever Zone #54 Becomes Not Secure
Then Dial xxx-xxx-xxxx and Announce xxxxxxxx
Whenever Zone #54 Becomes Secure
Then Dial xxx-xxx- and Announce xxxxxxxx
PLEASE HELP