My goal is to setup a separate set of contacts that would only be armed during away mode. These zones would be on "high target" areas - master bedroom dresser, closets, etc. All of this currently is working well as area 2 which is armed via rules with area 1. The zones are set as 03=burglar perimeter instant.
There are, however, a couple quirks that I'm wondering about:
1. When I arm at the keypad the voice will announce area 1 is armed - when I disarm the voice will announce area 2 is disarmed. Nothing about either zone any other time.
2. The zones for area 2 are configured as bypassable and NOT force armable. However, if I arm area 1 away (which arms area2) while a zone is not secure, then secure it after the exit delay, it will become active and can trigger the alarm. I thought only a force armable zone could do that?
There are, however, a couple quirks that I'm wondering about:
1. When I arm at the keypad the voice will announce area 1 is armed - when I disarm the voice will announce area 2 is disarmed. Nothing about either zone any other time.
2. The zones for area 2 are configured as bypassable and NOT force armable. However, if I arm area 1 away (which arms area2) while a zone is not secure, then secure it after the exit delay, it will become active and can trigger the alarm. I thought only a force armable zone could do that?