Hey guys I am baffled. I had a camera out of my farthest point from my home drop dead. I have two cat 6 running there.
I tested the port and camera on the switch with a patch cable and the camera works, so the switch works. Check
I tested the cable straight through with my Ideal cable tester that shows 54v POE and that I have 1000 on the network. Check
I've tested with two other testers as well. All tests through.
Anyway plug the camera in and I see that it does have power and the IR lights come on at boot. I even tried a different camera. No dice.
I am stumped. I spent two days, countless hours of testing and its HOT and im bothered and tired. I do see flapping on the switch.
I tried the other cable and its the exact same situation.Im pretty frustrated but looking for suggestions. Replacing the cable is NOT an option. I have replaced ends on both sides - countless times.
Thanks!
Neil
I tested the port and camera on the switch with a patch cable and the camera works, so the switch works. Check
I tested the cable straight through with my Ideal cable tester that shows 54v POE and that I have 1000 on the network. Check
I've tested with two other testers as well. All tests through.
Anyway plug the camera in and I see that it does have power and the IR lights come on at boot. I even tried a different camera. No dice.
I am stumped. I spent two days, countless hours of testing and its HOT and im bothered and tired. I do see flapping on the switch.
I tried the other cable and its the exact same situation.Im pretty frustrated but looking for suggestions. Replacing the cable is NOT an option. I have replaced ends on both sides - countless times.
Thanks!
Neil