Over the last two years I have solved many issues for my Elk M1 security and home automation system ( Leviton VRCOP RF+3) by reading this forum. Now I am stumped with a problem since day 1 with my Kwikset locks (910) working properly with the Z-wave interface. What happens is the locks work for a month and then just stop working. I exclude then and re-include them to no avail. Then just one day they start working again usually after I install a new outlet or switch.
I can always lock and unlock the locks via the primary controller Leviton VRUSB but can not lock or unlock via Elk rules. I thought I had the problem solved when I re-booted the M1XSLZW after I removed power from the VRCOP in that order. I have the latest firmware on the VRCOP and what I believe the latest firmware on the Elk M1XSLZW.
I have the correct text strings in the rules and basically do not change the rules because they work sometimes.
Thanks for any help
Bob
I can always lock and unlock the locks via the primary controller Leviton VRUSB but can not lock or unlock via Elk rules. I thought I had the problem solved when I re-booted the M1XSLZW after I removed power from the VRCOP in that order. I have the latest firmware on the VRCOP and what I believe the latest firmware on the Elk M1XSLZW.
I have the correct text strings in the rules and basically do not change the rules because they work sometimes.
Thanks for any help
Bob