Garage Door Close & Recheck Flag

lupinglade

lupinglade

Senior Member
Code: 
66.	WHEN Close Both Garage Doors
			THEN Garage Door Close & Recheck Flag ON FOR 30 SECONDS
67.	WHEN Garage Door Close & Recheck Flag ON
	WHEN Garage Door Close & Recheck Flag OFF
		AND IF Garage Left Overhead Door NOT READY
		AND IF Garage Right Overhead Door SECURE
			THEN Left Garage Door Link ON
68.	WHEN Garage Door Close & Recheck Flag ON
	WHEN Garage Door Close & Recheck Flag OFF
		AND IF Garage Left Overhead Door SECURE
		AND IF Garage Right Overhead Door NOT READY
			THEN Right Garage Door Link ON
69.	WHEN Garage Door Close & Recheck Flag ON
	WHEN Garage Door Close & Recheck Flag OFF
		AND IF Garage Left Overhead Door NOT READY
		AND IF Garage Right Overhead Door NOT READY
			THEN Both Garage Doors Link ON
 
I have a variation with voice and visual alerts inside the garage.

Code: 
299.	WHEN Close Garage
			THEN Garage Close Timer ON FOR 30 SECONDS
300.	WHEN Close Garage
		AND IF Garage Door Status Counter ON
		AND IF Garage Motion Counter OFF
			THEN SAY CLOSE GARAGE DOOR IN THIRTY SECONDS
			THEN Garage Bay 1&2 Lights ON FOR 2 SECONDS
			THEN Garage Bay 3 Lights ON FOR 2 SECONDS
			THEN Garage Voice Timer ON FOR 15 SECONDS
301.	WHEN Garage Voice Timer OFF
		AND IF Garage Door Status Counter ON
		AND IF Garage Motion Counter OFF
			THEN SAY CLOSE GARAGE DOOR IN FIFTEEN SECONDS
			THEN Garage Bay 1&2 Lights ON FOR 2 SECONDS
			THEN Garage Bay 3 Lights ON FOR 2 SECONDS
302.	WHEN Garage Close Timer OFF
		AND IF Garage Door Bay 1&2 NOT READY
		AND IF Garage Motion Counter OFF
			THEN SAY WARNING (Pause) CLOSE GARAGE DOOR NOW
			THEN SAY WARNING (Pause) CLOSE GARAGE DOOR NOW
			THEN Garage Lights ON
			THEN Garage Door Bay 1&2 ON FOR 2 SECONDS
			THEN Garage Close Timer ON FOR 1 MINUTE
303.	WHEN Garage Close Timer OFF
		AND IF Garage Door Bay 3 NOT READY
		AND IF Garage Motion Counter OFF
			THEN SAY WARNING (Pause) CLOSE GARAGE DOOR NOW
			THEN SAY WARNING (Pause) CLOSE GARAGE DOOR NOW
			THEN Garage Lights ON
			THEN Garage Door Bay 3 ON FOR 2 SECONDS
			THEN Garage Close Timer ON FOR 1 MINUTE
304.	WHEN Garage Close Timer OFF
		AND IF Garage Door Status Counter OFF
			THEN Garage Lights OFF
 
Here's mine. It just warns via a console message and beep.

Code: 
61.	WHEN Garage Doors Close
			THEN RUN Garage door west close
			THEN RUN Garage door east close
			THEN Garage door timer ON FOR 18 SECONDS
62.	WHEN Garage door west close
		AND IF Garage door west side NOT READY
			THEN Garage door opener west side ON FOR 3 SECONDS
63.	WHEN Garage door east close
		AND IF Garage door east NOT READY
			THEN Garage door opener east side ON FOR 3 SECONDS
64.	WHEN Garage door timer OFF
		AND IF Garage door west side NOT READY
		OR
		AND IF Garage door east side NOT READY
			THEN SHOW Garage door blocked WITH BEEP
			THEN LOG Garage door blocked
 
lupinglade said:
Code: 
66.	WHEN Close Both Garage Doors
			THEN Garage Door Close & Recheck Flag ON FOR 30 SECONDS
67.	WHEN Garage Door Close & Recheck Flag ON
	WHEN Garage Door Close & Recheck Flag OFF
		AND IF Garage Left Overhead Door NOT READY
		AND IF Garage Right Overhead Door SECURE
			THEN Left Garage Door Link ON
68.	WHEN Garage Door Close & Recheck Flag ON
	WHEN Garage Door Close & Recheck Flag OFF
		AND IF Garage Left Overhead Door SECURE
		AND IF Garage Right Overhead Door NOT READY
			THEN Right Garage Door Link ON
69.	WHEN Garage Door Close & Recheck Flag ON
	WHEN Garage Door Close & Recheck Flag OFF
		AND IF Garage Left Overhead Door NOT READY
		AND IF Garage Right Overhead Door NOT READY
			THEN Both Garage Doors Link ON
Click to expand...
Is the "Left/Right/Both Garage Doors Link" a button or outputs? Not following how you just turn them on, but never turn them off. Also, is "Close Both Garage Doors" a button as well?

Trying to understand the logic behind having 2 buttons that both essentially close both garage doors.

Also, ever afraid of a situation where you get into an endless loop - door being blocked, etc.
 
I don't own an HAI panel yet, so forgive me if I ask a stupid question.

I don't understand the purpose of these two WHEN statements together:
WHEN Garage Door Close & Recheck Flag ON
WHEN Garage Door Close & Recheck Flag OFF

It seems the condition will evaluate to true when Garage Door Close is true and effectively have nothing to do with Recheck Flag.

Couldn't this be done more easily with a single line
WHEN Garage Door Close
 
Mr Spock said:
I don't own an HAI panel yet, so forgive me if I ask a stupid question.

I don't understand the purpose of these two WHEN statements together:
WHEN Garage Door Close & Recheck Flag ON
WHEN Garage Door Close & Recheck Flag OFF
Click to expand...
Those nested WHEN triggers execute the code underneath them whenever EITHER codition is true.
It only triggers when there is a CHANGE of state. If the flag never changes, nothing happens.


Mr Spock said:
It seems the condition will evaluate to true when Garage Door Close is true and effectively have nothing to do with Recheck Flag.

Couldn't this be done more easily with a single line
WHEN Garage Door Close
Click to expand...

It is a failsafe. or a recheck. The close garage door signal is sent, then 30 seconds later it is rechecked, and if the door is still open, it resends the close signal. It's a way to ensure the door closes.

The Button "Close Both Garage Doors" turns on the flag "Garage Door Close & Recheck Flag" and sets it as a 30 second countdown timer.
So the code executes immidiately when the flag initially turns ON and again 30 seconds later when the flag turns OFF. Think of it like this:

Code: 
66.	 WHEN Close Both Garage Doors
		  THEN Garage Door Close & Recheck Flag ON FOR 30 SECONDS
67.	 WHEN Garage Door Close & Recheck Flag ON
	  AND IF Garage Left Overhead Door NOT READY
	  AND IF Garage Right Overhead Door SECURE
		  THEN Left Garage Door Link ON
68.	 WHEN Garage Door Close & Recheck Flag ON
	  AND IF Garage Left Overhead Door SECURE
	  AND IF Garage Right Overhead Door NOT READY
		  THEN Right Garage Door Link ON
69.	 WHEN Garage Door Close & Recheck Flag ON
	  AND IF Garage Left Overhead Door NOT READY
	  AND IF Garage Right Overhead Door NOT READY
		  THEN Both Garage Doors Link ON
70.	 WHEN Garage Door Close & Recheck Flag OFF
	  AND IF Garage Left Overhead Door NOT READY
	  AND IF Garage Right Overhead Door SECURE
		  THEN Left Garage Door Link ON
71.	 WHEN Garage Door Close & Recheck Flag OFF
	  AND IF Garage Left Overhead Door SECURE
	  AND IF Garage Right Overhead Door NOT READY
		  THEN Right Garage Door Link ON
72.	 WHEN Garage Door Close & Recheck Flag OFF
	  AND IF Garage Left Overhead Door NOT READY
	  AND IF Garage Right Overhead Door NOT READY
		  THEN Both Garage Doors Link ON
 
You must log in or register to reply here.

Similar threads

S
ELKM1 Rule - Text to Keypad on Zone Change
Replies
8
Views
550
amos
A
M
Can I Automate Force Arm?
Replies
3
Views
268
Mark S.
M
J
Elk M1XRF319 wireless zones acting opposite - READY=NOT READY and NOT READY=READY
Replies
11
Views
768
Sandpiper
Sandpiper
I
Rule not working as expected
Replies
9
Views
847
sic0048
S
pete_c
Pete's Blog Tiny Tasmota Garage Door Opener - Temperature Sensor - 2 contact sensors
Replies
3
Views
2K
pete_c
pete_c
Back
Top