HAI controller with Vizia RF switches

[rbwsparky]

I'm an electrician new to home automation. I'm working with a new customer installing incandescent wall sconces to be switched with a Vizia RF dimmer. He has HAI lumina and is able to operate existing lighting with no problem. I need to include this new dimmer and have it controlled through HAI lumina controller. Any guidance would be greatly appreciated.
 

 

[jlehnert]

Did your customer do the original install himself, or did a vendor do it?  You're going to need four things.  First, the master controller for the Z-wave system, so you can enroll the new switch into the Z-wave network.  Second, the Leviton USB stick (which may or may not be the master controller) and Leviton Vizia RF+ Installers Program.  These will allow you to program the VRCOP interface that connects to the Lumina.  And finally, programming access to the Lumina so you can enter the node # into the Lumina so it recognizes the new switch.

 

[rbwsparky]

The install was done by his previous electrician. Everything works the way it should. There is a Smartstick at the project, but I don't believe that to be the master controller. Programming access won't be a problem. Programming and node# will be the challenge we face. I am new to this style of lighting control. We have done x10 in the past, but have found it to be somewhat unreliable. Any advice will be appreciated. Thanks