HAI Wireless Receiver to OP II

[bighorn]

Hello,
Can someone pls confirm how I wire an HAI wireless receiver (HAI 45A00-1) to my OP II board? In reviewing my HAI's manual it appears that the wireless module connects to the same four terminals that I have my two HAI Keypads (10A11-1) wired to?  Do I use the same wiring terminals for the HAI keypads and then simply addresses the Wireless receiver within PCAccess?
 
Anything other relevant advice or feedback is welcome.
 
Thanks for your time.
 
 

 

[InspiredTim]

You wire the wireless receiver to the same terminals as the keypads. You have to change the the setting under zones/dealer settings. Change expansion enclosures to 1 or more if you have expansion enclosures. Now it will add another 16 zones under the zones tab in which you will need to name. I name the. KF1-1 KF1-2. KF2-1 and so on.

 

[ano]

Hello,
Can someone pls confirm how I wire an HAI wireless receiver (HAI 45A00-1) to my OP II board? In reviewing my HAI's manual it appears that the wireless module connects to the same four terminals that I have my two HAI Keypads (10A11-1) wired to?  Do I use the same wiring terminals for the HAI keypads and then simply addresses the Wireless receiver within PCAccess?
 
Anything other relevant advice or feedback is welcome.
 
Thanks for your time.

I'd consider the 42A00 as well. I think range is better, you can buy a repeater for it, and more sensors are available.