My electrician friend and I got things working - but the blue/green LEDs aren't accurately showing the status. I'm going to do my best to diagram how it is wired. These are all US-240s froms Simply Automated.
Top floor:
Line voltage comes in
Black/load capped.
White/neutrals capped.
Middle floor:
Black/load capped.
White/neutrals capped.
Downstairs:
Load goes out to lights
black/load capped.
white/neutrals capped.
And or course each is grounded.
The link is as follows:
Top floor switch:
No receive components
Transmit components - B 01, on/off button.
Currently, this one shows as blue regardless if the lights are on or off.
Middle floor switch:
No receive components
Transmit components - RT01, on button. RT02, off button.
Currently, this one shows as green regardless if the lights are on or off.
Bottom floor switch:
Receive Components - Lights - 100% snap
Transmit components - RT01, on button
Transmit components - RT02, off button
Some of these aren't dimmable so I want them to just snap on/off. At this point I believe they all work in terms of turning the lights on and off (top/middle definitely do) but the downstairs is down a lot of stairs and I don't want to go out in the rain again.
I also noticed that the 11-40s I have in a three way switch seem to have more options on the advanced edit tab (load controlled by rocker, store last level, etc) but they aren't available with the 240s. Which seems odd as the 240s should have more capabilities than the 1140s.
Any help would be appreciated. For the record, the three way switch is hooked up just like the four way (with the exception of the third light switch) and works exactly as I expect.
Thanks.
Top floor:
Line voltage comes in
Black/load capped.
White/neutrals capped.
Middle floor:
Black/load capped.
White/neutrals capped.
Downstairs:
Load goes out to lights
black/load capped.
white/neutrals capped.
And or course each is grounded.
The link is as follows:
Top floor switch:
No receive components
Transmit components - B 01, on/off button.
Currently, this one shows as blue regardless if the lights are on or off.
Middle floor switch:
No receive components
Transmit components - RT01, on button. RT02, off button.
Currently, this one shows as green regardless if the lights are on or off.
Bottom floor switch:
Receive Components - Lights - 100% snap
Transmit components - RT01, on button
Transmit components - RT02, off button
Some of these aren't dimmable so I want them to just snap on/off. At this point I believe they all work in terms of turning the lights on and off (top/middle definitely do) but the downstairs is down a lot of stairs and I don't want to go out in the rain again.
I also noticed that the 11-40s I have in a three way switch seem to have more options on the advanced edit tab (load controlled by rocker, store last level, etc) but they aren't available with the 240s. Which seems odd as the 240s should have more capabilities than the 1140s.
Any help would be appreciated. For the record, the three way switch is hooked up just like the four way (with the exception of the third light switch) and works exactly as I expect.
Thanks.