pete_c said:
The above said did you re download your stuff to your clients and do you see the humidity now?
Yes, I can see the Thermostat-Humidity now in the OMNILINK app. Thanks.
I have a programming question . .
We have an intermittent condition where we need to dehumidify in the winter, related to ground water raising the humidity in shallow dirt-floor crawlspace (this is a 100 year old lake cabin). The built in humid control in the dehumidifier does't do what we need.
So I have this simple program to control AC power to the dehumidifier. The fact that Current Thermostat values can't be a trigger, but can be a Condition makes it harder to program an email alert.
-------------------------------------------------------------------------
EVERY HOUR
AND IF Living Room Humidity is GREATER THAN 50
THEN dehumidifier on for 3 hours
------------------------------------------------------------------------
I want a flag that can be a signal to send an email alert when the Humidifier initially goes ON. The problem with the programming above is sends an ON signal every hour. I want to know when it goes ON for real, not an hourly reset for another 3 hours.
So how can I have a signal for an email alert when it actually goes ON ? . . it may stay on for a month in the summer, and don't want an on signal every hour.