Inetcam Switcher

[Andypet]

I have an Inetcam VS-800 video switcher that I would like to utilize.

Unfortunately, it uses RJ-45 connectors as it's inputs.

I've done a ton of research on this and have not been able to find what I need.

Does anyone have the pinouts for these inputs. I would like to use composite video inputs into these RJ-45 connectors. (I would assume that I will have to provide DC to the cameras independently.)

Can anyone help me accomplish this PLEASE!

Thanks in advance for any help you can provide.

Andy

 

[Andypet]

Anyone???

 

[electron]

Looks like trial and error is the only way of figuring this out, unless you can somehow get in touch with this guy.

 

[sda]

Try this:

http://www.oocities.com/zoomkat/files/RJ45.pdf

Copy/paste of document:
-----------------------

Inetcam
RJ-45 Pinout for our C-100 and C-200 Cameras
RJ-45 Plug PIN Number Standard CAT5 Wire Color Description Miscellaneous
1 White/Orange Video 75 ohm, 1Vpp
2 Orange Video Ground -
3 White/Green 12_volt+ -
4 Blue Reserved -
5 White/Blue Reserved -
6 Green 12_volt_Ground -
7 White/Brown Reserved -
8 Brown Reserved -
NOTE 1: All Pin assignments are subject to change in future products.
NOTE 2: Reserved pins should not be connected to non-Inetcam, Inc. equipment.

-------------

In addition to the pinout document,
Be sure to tell the customer that
Pin 3 is 12 volt +
Pin 6 is ground.

-----------