Memory/Operation Overflow

MrGibbage

Active Member
What are you supposed to do if you (that is, "I") have this condition? I just noticed the my M1G status light is blinking five fast times then a pause.
 
Reboot it. Check your automation rules to make sure you don't have anything in there that might cause issues, like letting a counter increment past 65535 or something.

I wish there was a way to do a bulk dump of the state of all counters, inputs, outputs, etc at any given time.
 
Yep, that did it. I don't know why I didn't try that first before asking.

Reboot it. Check your automation rules to make sure you don't have anything in there that might cause issues, like letting a counter increment past 65535 or something.

I wish there was a way to do a bulk dump of the state of all counters, inputs, outputs, etc at any given time.
 
I would still do a once-over on your rules and make sure there isn't something that's incrementing a counter past the limit or doing some weird math that might cause it.

Was the M1G still operational during this? Or was it failing to function properly?
 
I don't have too many rules, but I do have rules that use counters. Everything seemed to be working fine. I just happened to notice the blinking lights the other day.

I would still do a once-over on your rules and make sure there isn't something that's incrementing a counter past the limit or doing some weird math that might cause it.

Was the M1G still operational during this? Or was it failing to function properly?
 
Back
Top