Hi fellas!
This is my follow up thread to my earlier one requesting power planning assitance. I will be using this thread to document my installation and centralize any questions and help that I will surely solicit from the collective mind here.
I ended up getting a great deal on eBay for an Altronix AL400ULX power supply to use with my system.
I have ordered and received most of the following:
1 M1G (Gold) Kit (Sys4) in Cardboard only (NO CAN) with
3 M1KP2
3 Back box for flush mounting M1KP2
3 16 Zone Input Expanders
1 Ethernet Port Interface
1 Wireless Receiver, 2 Antenna, Honeywell (Ademco) Xmtrs
1 Data bus hub
1 Relay Board, 8 form C, connects to M1, M1XOVR, or M1XOV
3 SP12 Speaker; Flush mount, 12W, 32 Ohm
1 ELK 44Speaker; 30W/50W
1 ELK 1RT Speaker; 30W/50W, Stainless Housing
1 Strobe Light, Blue
2 PD-9 High Current Power Distribution to 9 Devices (400mA ea)
1 4530 EX Full Data For Primary Only
1 12 Volt 8.0AH Sealed Lead Acid Battery w/F1 Terminals
Bosh ISC-BDL2-WP12G 35 x 35 Blue Line Tritech motions
2 2WT-B - Smoke Sensor, 2-Wire Photoelectric, Thermal
4 Multipurpose Adapter Plate, 3” w/plastic standoffs
1 Double Side Foam Tape; .25” thick
I am mounting all of this in a 42" Leviton structured enclosure.
My first step is going to be bench testing and watching a whole bunch of training videos and manual reading!
Excited to officially start setting up the foundation of my homes brains!
This is my follow up thread to my earlier one requesting power planning assitance. I will be using this thread to document my installation and centralize any questions and help that I will surely solicit from the collective mind here.
I ended up getting a great deal on eBay for an Altronix AL400ULX power supply to use with my system.
I have ordered and received most of the following:
1 M1G (Gold) Kit (Sys4) in Cardboard only (NO CAN) with
3 M1KP2
3 Back box for flush mounting M1KP2
3 16 Zone Input Expanders
1 Ethernet Port Interface
1 Wireless Receiver, 2 Antenna, Honeywell (Ademco) Xmtrs
1 Data bus hub
1 Relay Board, 8 form C, connects to M1, M1XOVR, or M1XOV
3 SP12 Speaker; Flush mount, 12W, 32 Ohm
1 ELK 44Speaker; 30W/50W
1 ELK 1RT Speaker; 30W/50W, Stainless Housing
1 Strobe Light, Blue
2 PD-9 High Current Power Distribution to 9 Devices (400mA ea)
1 4530 EX Full Data For Primary Only
1 12 Volt 8.0AH Sealed Lead Acid Battery w/F1 Terminals
Bosh ISC-BDL2-WP12G 35 x 35 Blue Line Tritech motions
2 2WT-B - Smoke Sensor, 2-Wire Photoelectric, Thermal
4 Multipurpose Adapter Plate, 3” w/plastic standoffs
1 Double Side Foam Tape; .25” thick
I am mounting all of this in a 42" Leviton structured enclosure.
My first step is going to be bench testing and watching a whole bunch of training videos and manual reading!
Excited to officially start setting up the foundation of my homes brains!