Ok so I have 6 sensors connected and I had a pretty hard time getting them all connected to the board. I want to connect a couple more. What do you guys use? I am thinking about some terminal strips to break it down to a couple per terminal. Maybe I will create a board to connect them to. Haven't decided. At the moment I have used separate cat5 for each two sensors. One sensor on the Blu - Org pair and one on the Grn - Brn pair. I found that I could not get multiple sensors to work on the same wires ie: two sensors on the Blu - Org pair. My wiring is :
#1 Wht/Blu
#2 Blu/Wht
#3 W/Org
Org/Wht -- Spared not used.
I thought that this wiring would pair the Data wire with the Gnd wire to shield it somewhat.
Anyway if anyone has any suggestions they would be much appreciated.
Thanks
#1 Wht/Blu
#2 Blu/Wht
#3 W/Org
Org/Wht -- Spared not used.
I thought that this wiring would pair the Data wire with the Gnd wire to shield it somewhat.
Anyway if anyone has any suggestions they would be much appreciated.
Thanks