I'm looking to add an Essex keypad (wiegand) to our garage as an add-on to an existing M1 Gold system. Right now I'm bench testing the keypad by connecting it to one of my live M1KP keypads. I have a user setup in RP with the keypad's site code and pin and have selected authorization to arm and disarm. Where I am now stymied is that entering the code on the Essex keypad when the system is disarmed does arm the system. But once the system is armed, this same code will not disarm via the Essex. In the log, the arming shows but the attempts to disarm do not appear.
I've gone through the old tried and true several times... re-enrolling, powering down and back up, etc. I've also tried numerous combinations of user authorization options. I even thought possibly a code lockout from my early testing so I changed G12 to 99 (disabled) temporarily and have deleted the user and created new. No luck.
I have a suspicion there is something relativelly simple I am overlooking but I can't think of it and I've searched Cocoontech and also Google but I've not seen any similar problems (which really makes me think it may be something simple I'm not seeing).
Any advice would be greatly appreciated. Thanks in advance.
I've gone through the old tried and true several times... re-enrolling, powering down and back up, etc. I've also tried numerous combinations of user authorization options. I even thought possibly a code lockout from my early testing so I changed G12 to 99 (disabled) temporarily and have deleted the user and created new. No luck.
I have a suspicion there is something relativelly simple I am overlooking but I can't think of it and I've searched Cocoontech and also Google but I've not seen any similar problems (which really makes me think it may be something simple I'm not seeing).
Any advice would be greatly appreciated. Thanks in advance.