Hi,
I'm setting up a weather station using primarily Hobby Boards. This is what it looks like:
+ --- PC
|
| 4'
|
+ HB Power injector <-- ( 20VDC )
+ HB Barometer
|
| 15'
|
+ HB Temp/Humidity/Solar
|
| 25'
|
+ HB Anemometer ADS
|
| 1'
|
+ HB Lightning detector
|
| 70'
|
+ Dallas rain gauge
Everything is fine until I plug in the rain gauge into the lightning detector. When I do, the network becomes unstable. When watching it with OneWireViewer, I see the various devices come & go. If I plug the rain gauge in to the PC, it's detected & behaves properly.
I'm using CAT5E & the RJ-45 connections on the Hobby Boards.
Any suggestions for diagnosing the trouble & fixing it? Time for a powered hub?
Thanks!
--Mike
I'm setting up a weather station using primarily Hobby Boards. This is what it looks like:
+ --- PC
|
| 4'
|
+ HB Power injector <-- ( 20VDC )
+ HB Barometer
|
| 15'
|
+ HB Temp/Humidity/Solar
|
| 25'
|
+ HB Anemometer ADS
|
| 1'
|
+ HB Lightning detector
|
| 70'
|
+ Dallas rain gauge
Everything is fine until I plug in the rain gauge into the lightning detector. When I do, the network becomes unstable. When watching it with OneWireViewer, I see the various devices come & go. If I plug the rain gauge in to the PC, it's detected & behaves properly.
I'm using CAT5E & the RJ-45 connections on the Hobby Boards.
Any suggestions for diagnosing the trouble & fixing it? Time for a powered hub?
Thanks!
--Mike