UPB "SPECIAL SWITCH"

I have a custome who has ever swithch in their house automated with HAI UPB switches... EXCEPT one single gang location has two rockers.
This is a single gang box with two rockers in it, one controls some kitchen lights, the other controls an led lighting string above the cabinets. Both of which are pretty vital to the lighting scenes.
Anybody out there making UPB switches which have 2 switches in a single gang box? I found some from SA, that are a small rocker, and 4 scene buttons. But I must control 2 loads..
 
The US22 controls dual loads.

US22-40 Universal Dual Dimmer-Controller (2 x 550W) Base with timers
http://www.simply-automated.com/products/s...y_brilliant.php


The best thing I thin about the SA switches is you can change the faceplate, so you can use the US22-40 switch (which I have 2 of working great) I have 2 switches over 4 buttons like you stated which I use the 4 buttons as scene controls throughout my house.

Depending on the software they have configured you may have problems controlling/seeing status of the two "channels"( loads ) originally even upstart coundn't show the status correctly.
 
The US22 controls dual loads.

US22-40 Universal Dual Dimmer-Controller (2 x 550W) Base with timers
http://www.simply-automated.com/products/s...y_brilliant.php


The best thing I thin about the SA switches is you can change the faceplate, so you can use the US22-40 switch (which I have 2 of working great) I have 2 switches over 4 buttons like you stated which I use the 4 buttons as scene controls throughout my house.

Depending on the software they have configured you may have problems controlling/seeing status of the two "channels"( loads ) originally even upstart coundn't show the status correctly.

Hey thanks guys, you saved me valuable time on Google.
Much appreciated
 
Back
Top