Wall Mounting Computer Speakers without Visible wires

[Optimus124]

Hey,

I have a set of Logitech z5300s that I want to wall mount. What is the best method to do this and hiding the wires. I already have some couplers and long cable, so length is not an issue. Any ideas would be nice

Here is a link to the specs:
http://www.amazon.com/Logitech-Z-5300-5-1-...r/dp/B0000C20R9

 

[sic0048]

Hey,

I have a set of Logitech z5300s that I want to wall mount. What is the best method to do this and hiding the wires. I already have some couplers and long cable, so length is not an issue. Any ideas would be nice

Here is a link to the specs:
http://www.amazon.com/Logitech-Z-5300-5-1-...r/dp/B0000C20R9

If you have access to either the attic directly above or a crawl space directly below, then you can fish the wire through the wall pretty easily (especially an interior wall that doesn't have insulation in it). If you do not have access directly above or below, it can be rather hard to run wire. You might be better off running some thin wire chases directly on the wall. Or perhaps run the wire in the wall down to the base board and then run it around the base board (or even behind it).

 

[Optimus124]

Hey,

I have a set of Logitech z5300s that I want to wall mount. What is the best method to do this and hiding the wires. I already have some couplers and long cable, so length is not an issue. Any ideas would be nice

Here is a link to the specs:
http://www.amazon.com/Logitech-Z-5300-5-1-...r/dp/B0000C20R9

If you have access to either the attic directly above or a crawl space directly below, then you can fish the wire through the wall pretty easily (especially an interior wall that doesn't have insulation in it). If you do not have access directly above or below, it can be rather hard to run wire. You might be better off running some thin wire chases directly on the wall. Or perhaps run the wire in the wall down to the base board and then run it around the base board (or even behind it).

Thanks

 

[aehusted]

You can get flat wire for speakers that will go under carpet or can be painted over on walls. I don't have any first hand experience with the stuff, but you can find one version here.

Hey,

I have a set of Logitech z5300s that I want to wall mount. What is the best method to do this and hiding the wires. I already have some couplers and long cable, so length is not an issue. Any ideas would be nice

Here is a link to the specs:
http://www.amazon.com/Logitech-Z-5300-5-1-...r/dp/B0000C20R9