AutomatedOutlet
Senior Member
Yes, for 120VAC, the XPR-W is an X10 outlet that will handle a full 20 amps.
For and X10 controlled 240VAC controller, the Elk-9100 will handle up to 30 amps.
X10 outlet trouble
- Thread starter jumbodogs
- Start date
Yes, for 120VAC, the XPR-W is an X10 outlet that will handle a full 20 amps.
For and X10 controlled 240VAC controller, the Elk-9100 will handle up to 30 amps.
jumbodogs
Member
Thinking about this some more ... I need to run some speaker wire near pool anyway so if I was to go with a wired solution that is connected to my Secu-16 http://www.appdig.com/Secu16/secu16.html
I was wondering if someone could recommend the relay and wire I would need to control my pool that way. I was also thinking about down the road some temp sensors out there so should I run some Cat5 also?
I was wondering if someone could recommend the relay and wire I would need to control my pool that way. I was also thinking about down the road some temp sensors out there so should I run some Cat5 also?
