XEP installation--virtual keypad

[lugnut]

Plugging along, piece by piece. Installing the XEP is next. It all went well (now that I know how to enroll devices ;o)), local network only (for now), except when I got to the virtual keypad (VK).

It sort of works for the limited things I currently have hooked up, but the window in the Java app which I think is supposed to indicate what is in the LCD window on the keypad seems to have problems knowing what state it is in.

For example, right now I started the VK app again, and the window reads "Armed Vacation" but the system is actually disarmed, and I disarmed it right before I last shut the VK down. It seems to show one step behind the actual state, even when I hit the refresh button.

Any ideas?

 

[DeLicious]

in elkRP, make sure globals g29-g42 are all checked.

 

[Steve]

Heh, just re-enroll it

Do you have all boxes under serial port 0 on the Globals G29-42 tab checked? Are the states correct in the status screen in RP?

Oh, and BTW, on the enrolling - you know you can enroll devices from within RP as well, not just from a keypad.

Edit: I guess Delicious types alot faster than me!

 

[lugnut]

Thanks guys. I missed one previously as I was clicking those boxes. That fixed it.

Steve: which states in the RP status screen are you referring to? Do you mean the zone status that comes up when I click the "status" icon at the top?

Thanks for the tip on enrolling from RP.

 

[Steve]

Yea, the status screen. You mentioned arming state and that and the zone status are on the status screen.