I'm trying to make sure I have the proper setting on the TCP/IP tab for the M1XEP.
My ISP is Comcast, with a cable modem. I have a D-Link router.
I'm using static IP with these settings:
IP Address: 192.168.0.248
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.0.1
For DNS I don't know what to use. Is this the LAN DNS which I understand is same as default gateway, or WAN DNS, which I was told for Comcast is 75.75.75.75 / 75.75.76.76 (primary/secondary), or what I see in my router status page which is 204.194.232.200 / 204.194.234.200?
does the fact that I have an account with dyndns make any difference what I put here? The dynamic DNS tab is filled out on my M1XEP and tests correctly.
My next step will be to get email working with the M1, but didn't want to get too hung up on that until I know the TCP/IP is set up properly. After reading the posts about email setup my head is still spinning, not looking forward to that!
Thanks for any help.
My ISP is Comcast, with a cable modem. I have a D-Link router.
I'm using static IP with these settings:
IP Address: 192.168.0.248
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.0.1
For DNS I don't know what to use. Is this the LAN DNS which I understand is same as default gateway, or WAN DNS, which I was told for Comcast is 75.75.75.75 / 75.75.76.76 (primary/secondary), or what I see in my router status page which is 204.194.232.200 / 204.194.234.200?
does the fact that I have an account with dyndns make any difference what I put here? The dynamic DNS tab is filled out on my M1XEP and tests correctly.
My next step will be to get email working with the M1, but didn't want to get too hung up on that until I know the TCP/IP is set up properly. After reading the posts about email setup my head is still spinning, not looking forward to that!
Thanks for any help.