Recent content by MrSpeed

Never mind, for some reason it started to work the way it should have been.

I just noticed a week ago that the LCD dislay is always lit on both my HAI control pannels. According to everithing I have read here and other web sites, the display is supposed to turn off in 3 minutes or so after last activity. That is not the case with mine. What could be causing them to...

First thank you all for helping out. John, do you mind sharing your program. The lock extending is one of the reasons I went with this lock. I wanted to keep it from locking unless the door was closed, I curently have it on auto lock but 30 secconds is not enough for me to go to the mailbox...

Bump!

I have the zwave kwikset hooked to my HAI. I can see the status on PCAccess when the lock is opened or closed. I want a code to auto lock the door one minute after the lock is opened. The lock comes with a default 30 seconds auto relock and that is not long enough for me to walk to the...

Hard to beleive that it has been almost three years since I started my project. I will update with new pictures over the next couple days!!! I do promiss to add the pictures this time :)

What is the best way or equipment to distribute infra red connectors trough the house to control tv's and stuff back in the media room?

I ended up going with the monoprice 8 inch speakers, I tried their 6.5 speakers but did not care much form them "they did not have enough base". Although I am sure there are better speakers out there, maybe i will consider something better down the road, for now the monoprice speakers are...

I should be adding some more pictures in a couple days, I am almost done with all my wiring, since I last posted I got just about all my speakers installed. I installed the Russound, the video matrix and much more. I am pleased with the progress I have made.

Update, I am now able to program some switches, but cannot program the ones in my bedroom "which is the farthest switches" from the HAI panel, do I need some kind signal booster? By the way I was able to program these switches before.

I am unable to program my devices, when i try to program them I get the "no module in setup" message. I was able to program my devices before, I purchased a second 60A00-1 so that I did not have to share one with HAI and CQC. I did a reset on my switch but it is still not seeing the devices...

Yep they are CElabs, I m leaning towards keeping them, I still find the picture brighter than if I used the regular component and have to tweak it. When there are high def scenes that show close up of faces etc, I an notice the picture switch details on intervals "a little blury then back to...

I purchased these units and wanted to know if they are truly no video loss and if they work as good as running a cable directly to the tv. I plugged them in yesterday and maybe it is me but i thought that the image use not as crisp. The alternative is running cables, which will be cheaper but...

Crap I have rg6 and two spare 12 gauge cables, no way to use the two spare 12 gauge cables for the subwoofer? It is a powered sub. Thanks for the link to the plugs I need!

Ok I ran cables for all my speakers from the closet to the livingroom. I used a monoprice wall plate http://www.monoprice.com/products/product....=1&format=2 What is the best way to connect these? I think I read that if you screw them on to the plate they eventually work themselves loose...