Elk EZ8 and having siren work?

[theedudenator]

I know I had this working before, not sure what happened. I might have done something to silence the siren when working in ElkRP at night.

I have a GE piezo on Output 2
I disconnected the wires from the elk and used a 9v battery on the wires to confirm the Piezo will sound.
I hooked the wires back to the Elk.

When I arm the system, then intentiony trip it I get flashing and beeps from my keypads. No siren...

In ElkRP2 in Globals

G14 = Change Yelp Siren to Buzzer (not checked)

G26-G28 (Output2)
Output 2 hookup = Siren Output
Output 2 delay - 5 seconds
Output 2 single alarm lock out (checked)

 

[video321]

Output 2 should be set for voltage, not siren.

 

[theedudenator]

Is there a way to program or trigger the alarm from ElkRP for testing?

 

[theedudenator]

I made that change and it is still not working.
Just getting beeps from the keypads when the alarm is going off.

I do have a resitor across the output 2?

 

[theedudenator]

I have 4.4volts on Output 2 with the alarm on or off

 

[theedudenator]

I pulled the resitor off and I had a faint alarm coming from the Piezo

 

[brad]

Do you have Output 2 Trouble being displayed on the keypad? Check in ElkRP under Globals G26 to make sure Output 2 is set to Voltage and under Cutoff Timers to make sure the Alarm Duration is set to a value --- for example 600 seconds