I am having trouble with an expansion zone and wondering if anyone has ideas on how to fix the issue.
I can't see any of the zones.
This started with checking a zone prior to spray foam insulation. I couldn't get the zone to recognize. Redid the EOL resistor twice, traced the wire, then replaced it figuring something was wrong.
Same results on second wire. Decided to put an EOL resistor on the next set of terminals. I expected that zone to come up normal. That was my litmus test for seeing the expander and it's zones.
The LED on the expander says it is enrolled in the bus and okay.
I turned the system off and changed its address and brought it back up, got 5 flashes indicating ready to enroll.
I'm using ELKRP.
The bus config is keypad to Main to DBHUB to Expander.
DB Hub to Expansion power supply.
An ethernet interface is attached to the Main. I'm using a laptop to access programming via ELK RP.
I'll eventually add other devices and the excel spreadsheet from Elk indicates more power will be needed, hence the expansion power supply.
I'm planning to contact Automated Outlet (dealer) tomorrow, but was hoping someone can point out something I've missed.
I can't see any of the zones.
This started with checking a zone prior to spray foam insulation. I couldn't get the zone to recognize. Redid the EOL resistor twice, traced the wire, then replaced it figuring something was wrong.
Same results on second wire. Decided to put an EOL resistor on the next set of terminals. I expected that zone to come up normal. That was my litmus test for seeing the expander and it's zones.
The LED on the expander says it is enrolled in the bus and okay.
I turned the system off and changed its address and brought it back up, got 5 flashes indicating ready to enroll.
I'm using ELKRP.
The bus config is keypad to Main to DBHUB to Expander.
DB Hub to Expansion power supply.
An ethernet interface is attached to the Main. I'm using a laptop to access programming via ELK RP.
I'll eventually add other devices and the excel spreadsheet from Elk indicates more power will be needed, hence the expansion power supply.
I'm planning to contact Automated Outlet (dealer) tomorrow, but was hoping someone can point out something I've missed.