Ethernet Adapter PRoblems

[dsabot]

I am about to blow my brains out trying to figure this out. My ELK-M1XEP is set at 192.168.1.3. I have opened ports 2101, 2601, 80, 26 all to that ip addres. I am easily able to connect to the M1 via ElkRP. The problem is connecting to the web version. I type in 192.168.1.3 and am greeted with the login and password which brings up the panel, then I either get an hour glass forever, or the panel with all the buttons but an hour glass. I have made all the changes in my globals for the correct baud rate, and reporting on serial port, I have checked my serial port cable to ensure a tight fit, I have tried this on two different pcs with firefox and ie, I have updated java to the latest version, and I even sent the M1EXP in for service and had it returned to me today. I have made sure my areas and keypads don't start with a space, I have even prayed to several gods. All to no avail. I ran a debugger on the java console and even cleared the cache. The only thing I can see was one error in the console:
network: Version checking for XEP233.jar, specified version is 0.0.0.2
network: Cache entry found [url: http://192.168.1.2/XEP233.jar, version: 0.0.0.2]
network: Cache entry not found [url: http://192.168.1.2/XEP233.jar, version: null]

I don't know if it even means anything, but I thought I would mention it. Somebody please help me, I am about to jump...

 

[briankelly63]

I am about to blow my brains out trying to figure this out. My ELK-M1XEP is set at 192.168.1.3. I have opened ports 2101, 2601, 80, 26 all to that ip addres. I am easily able to connect to the M1 via ElkRP. The problem is connecting to the web version. I type in 192.168.1.3 and am greeted with the login and password which brings up the panel, then I either get an hour glass forever, or the panel with all the buttons but an hour glass. I have made all the changes in my globals for the correct baud rate, and reporting on serial port, I have checked my serial port cable to ensure a tight fit, I have tried this on two different pcs with firefox and ie, I have updated java to the latest version, and I even sent the M1EXP in for service and had it returned to me today. I have made sure my areas and keypads don't start with a space, I have even prayed to several gods. All to no avail. I ran a debugger on the java console and even cleared the cache. The only thing I can see was one error in the console:
network: Version checking for XEP233.jar, specified version is 0.0.0.2
network: Cache entry found [url: http://192.168.1.2/XEP233.jar, version: 0.0.0.2]
network: Cache entry not found [url: http://192.168.1.2/XEP233.jar, version: null]

I don't know if it even means anything, but I thought I would mention it. Somebody please help me, I am about to jump...

Ever get this working.... my first question would have been does it work properly within your local network vs. from the internet....

 

[dsabot]

I am about to blow my brains out trying to figure this out. My ELK-M1XEP is set at 192.168.1.3. I have opened ports 2101, 2601, 80, 26 all to that ip addres. I am easily able to connect to the M1 via ElkRP. The problem is connecting to the web version. I type in 192.168.1.3 and am greeted with the login and password which brings up the panel, then I either get an hour glass forever, or the panel with all the buttons but an hour glass. I have made all the changes in my globals for the correct baud rate, and reporting on serial port, I have checked my serial port cable to ensure a tight fit, I have tried this on two different pcs with firefox and ie, I have updated java to the latest version, and I even sent the M1EXP in for service and had it returned to me today. I have made sure my areas and keypads don't start with a space, I have even prayed to several gods. All to no avail. I ran a debugger on the java console and even cleared the cache. The only thing I can see was one error in the console:
network: Version checking for XEP233.jar, specified version is 0.0.0.2
network: Cache entry found [url: http://192.168.1.2/XEP233.jar, version: 0.0.0.2]
network: Cache entry not found [url: http://192.168.1.2/XEP233.jar, version: null]

I don't know if it even means anything, but I thought I would mention it. Somebody please help me, I am about to jump...

Ever get this working.... my first question would have been does it work properly within your local network vs. from the internet....

Yes I did get it working thanks for asking. It was a combination of updating the router, and and getting tech support from the good people at Elk.

 

[allen363]

I am about to blow my brains out trying to figure this out. My ELK-M1XEP is set at 192.168.1.3. I have opened ports 2101, 2601, 80, 26 all to that ip addres. I am easily able to connect to the M1 via ElkRP. The problem is connecting to the web version. I type in 192.168.1.3 and am greeted with the login and password which brings up the panel, then I either get an hour glass forever, or the panel with all the buttons but an hour glass. I have made all the changes in my globals for the correct baud rate, and reporting on serial port, I have checked my serial port cable to ensure a tight fit, I have tried this on two different pcs with firefox and ie, I have updated java to the latest version, and I even sent the M1EXP in for service and had it returned to me today. I have made sure my areas and keypads don't start with a space, I have even prayed to several gods. All to no avail. I ran a debugger on the java console and even cleared the cache. The only thing I can see was one error in the console:
network: Version checking for XEP233.jar, specified version is 0.0.0.2
network: Cache entry found [url: http://192.168.1.2/XEP233.jar, version: 0.0.0.2]
network: Cache entry not found [url: http://192.168.1.2/XEP233.jar, version: null]

I don't know if it even means anything, but I thought I would mention it. Somebody please help me, I am about to jump...

Ever get this working.... my first question would have been does it work properly within your local network vs. from the internet....

Yes I did get it working thanks for asking. It was a combination of updating the router, and and getting tech support from the good people at Elk.

I'm having the exact same problem. I can get to the M1XEP via ELKRP and I can get to the web server as far as the request for user code but once I enter the user code and press connect it just goes into it's "thinking" state. Can Spanky or somebody else post the fix or what should be considered?

Thanks,
Allen

 

[nov0798]

Are there any spaces in the area name in the setup in rp? I was facing the same problem, and this fixed it, by removing the spaces.