picta said:
Before connecting RA2 system to HAI you have to use RA configuration software to set up your lighting system. Then
1. Set the Serial Function for the serial port on the HAI controller to RadioRA 2.
2. Set the House Code Format for the desired units in the HAI controller to RadioRA 2.
3. Each RadioRA 2 device is assigned an integration ID by the RadioRA 2 system. The integration IDs may be viewed from the “IDs” tab of the “Settings | Integration” menu item in the RadioRA 2 configuration software. Using HAI PC Access software, enter the integration ID for each device into the “Node ID” field for the corresponding HAI unit.
Now you can use RA2 units in HAI automation programming.
Also you can take advantage of the HAI trigger "On RadioRA button press". For example, if you have an RA2 button programmed to activate an All Off sceen, you can trigger HAI actions when this button is pressed, like arm the system and set back the thermostat.
thanx for advising me.
1)i have done so far in pc access house format all devices to radio ra2 and given them their ids number under the node id section through pc access delaer software.
2) i have questions to ask how 6 button keypad and dimmers will work further more?
3) do i need to do anything in pc access under scenes, buttons sections?
4) its to complicated..first talk about scenes under pc access software. when i click on scene option and then i see radio ra2 phantom buttons option but what will be next step there>
5) second when i go to buttons section i see 255 buttons on pc access..so i got 6 buttons radio ra2 keypads total 4 kp on the wall so thats means i have total 24 buttons which i need to enter the name and description each buttons starting from 1 -24. thts how it gona work out for keypads buttons in pc access software?
6) although i am confused between phantom buttons and buttons sections of pc access..are both sections are same ?
7) its really easy to do configuration all scenes and buttons under radio ra 2 software..
8) MY SCENARIO i want to control following dimmers:
family room dimmers x2, lving room dimmersx2, main door chandlier, outdoor post lights, office lights, kitchen light, loft area lightsx2,
6 buttons keypads total 4: main door keypad, living room keypad, kitchen area keypad, office keypad.
9) everthing is configured in radio ra 2 software. all the buttons of keypads are assigned already according to the zone name and locations..
now for hai integration everthing will be changed or remain same?
10) can you pls guide me step by step..thanx