BraveSirRobbin
Moderator
Steve;
If this is truly a "current" sensor it should have the same trip point sensitivity no matter what the voltage is. The problem may be though that 220 volt devices will draw less current for a given 120 volt device for a similar application.
You can calculate this as Power = Voltage * Current (or Watts = Volts * Amps)
If this is truly a "current" sensor it should have the same trip point sensitivity no matter what the voltage is. The problem may be though that 220 volt devices will draw less current for a given 120 volt device for a similar application.
You can calculate this as Power = Voltage * Current (or Watts = Volts * Amps)