Resetting UPB Link

[ckg1999]

All,
 
At night, I have a "Arm" button I leverage to arm the system and turn off all the lights, except for a couple (the arm button is via UPB link).  I want all the UPB links I have set to scenes (fireplace, entertaining, etc) to reset to "Deactivated", that way I can leverage the "toggle" function of the buttons on the Simply Automated switches.
 
Is this possible?  Is there another way to do this?
 
Thanks!
 

 

[Desert_AIP]

The toggle function of the switches does not work that way.
Each individual switch is internally toggled.
If a press Activates the link, the next press will Deactivate it.
There is no way to send a command to the switch to toggle the state internally to the switch.
Even if another switch sends the deactivate command for the same link, a second press of the first switch will send a deactivate command (it will appear as if nothing happened because the link was already deactivated).
 
This is why I rarely use the toggle function, especially for multiple switches sharing a link, the switches get out of sync.
I use the single press activate, double press deactivate logic or I use two buttons; one activate, one deactivate.