Simply Automated Versus HAI/PCS

[Event5]

I heard of someone who used the Omni Pro and had two networks. He had one network for the outside and another for the inside.
Are you sure you will used all 250?

Dave

 

[jijo_robert]

Can I use a junction box to divide one incoming line to two and use two UPB network?

 

[jijo_robert]

I heard of someone who used the Omni Pro and had two networks. He had one network for the outside and another for the inside.
Are you sure you will used all 250?

Dave

Yes, we need more than 250 links.

 

[Event5]

I heard of someone who used the Omni Pro and had two networks. He had one network for the outside and another for the inside.
Are you sure you will used all 250?

Dave

Yes, we need more than 250 links.

You can have multiple networks on the same powerline. They just will not talk to each other without going through some sort of controller that can talk to both. I beleive the Omni Pro 11 can do this. If your multiple networks do not need to cross communicate too much there may be a workaround. Do you have a plan for a central controller?

Dave

 

[jijo_robert]

I heard of someone who used the Omni Pro and had two networks. He had one network for the outside and another for the inside.
Are you sure you will used all 250?

Dave

Yes, we need more than 250 links.

You can have multiple networks on the same powerline. They just will not talk to each other without going through some sort of controller that can talk to both. I beleive the Omni Pro 11 can do this. If your multiple networks do not need to cross communicate too much there may be a workaround. Do you have a plan for a central controller?

Dave

I am planning to use home built controller with Homeseer software. As for as software I am open to other options as well.