<p>Thanks for so many tips and how-tos! </p>
<p> </p>
<p>So this is interesting.... I changed the port number... no difference. I downloaded new FW into the Omni-touch which still isn't connecting to the controller... no change... BUT I unplugged the ethernet cable from the email board and now canuseeme shows the port is OPEN!.. I'm basically back to where snap link gave me SOME of my screens but not all of them... For example:</p>
<p> </p>
<p>It now connects rather than giving me a connection error. It shows the main menu of Status, Control, Security, Buttons, Temps and Events.</p>
<p>Of those I get information on STATUS, SECURITY, EVENTS. I can arm and disarm alarm from snaplink! Of course I get no text about the activities as I would expect. </p>
<p>I get nothing but a blue background on CONTROL, BUTTONS, TEMPS. I use to get all my units, thermostats, etc. I could turn off, on and Dim lights, I could set thermostats.</p>
<p> </p>
<p>NOW what is the problem? It's not port forwarding... </p>
<p> </p>
<p>I'm strategizing how to get my email board back, but first, I'll focus on Snap link and getting it 100% functional first. The OmniTouch problem got fixed, too by downloading new code then disabling the email notifier card. </p>
<p> </p>
<p>So this is interesting.... I changed the port number... no difference. I downloaded new FW into the Omni-touch which still isn't connecting to the controller... no change... BUT I unplugged the ethernet cable from the email board and now canuseeme shows the port is OPEN!.. I'm basically back to where snap link gave me SOME of my screens but not all of them... For example:</p>
<p> </p>
<p>It now connects rather than giving me a connection error. It shows the main menu of Status, Control, Security, Buttons, Temps and Events.</p>
<p>Of those I get information on STATUS, SECURITY, EVENTS. I can arm and disarm alarm from snaplink! Of course I get no text about the activities as I would expect. </p>
<p>I get nothing but a blue background on CONTROL, BUTTONS, TEMPS. I use to get all my units, thermostats, etc. I could turn off, on and Dim lights, I could set thermostats.</p>
<p> </p>
<p>NOW what is the problem? It's not port forwarding... </p>
<p> </p>
<p>I'm strategizing how to get my email board back, but first, I'll focus on Snap link and getting it 100% functional first. The OmniTouch problem got fixed, too by downloading new code then disabling the email notifier card. </p>