Someone was having trouble with flags showing up but i can't find the OP. Anyway, Omni does something funky with flags. For example flags 457-508 are only available from within Omni automation programs. I verified this with tech support a while back. Are your missing flags in that range or can you not see any flags at all?
Haiku Space Questions/Troubleshooting/etc
- Thread starter lupinglade
- Start date
lupinglade
Senior Member
Yes, the same way -- just set the Touchscreen # in the controller settings in Space then issue a show camera command as usual on the controller.avpman2 said:
lupinglade
Senior Member
This makes Space act more appropriately for being mounted on the wall. Ie. it will display disarm prompt if you enter the house while its armed, do security countdown beeps, automatically reconnect if a connection is lost, display notifications for a longer time, etc.avpman2 said:
As far as having more info displayed on the home screen, we're working on that.
jlipsit
Member
There is a problem / difference in SPACE in how the Geographical Region is handled.
In SPACE when the APP opens (after previously crashing or force close) the geofence action fires even when you are already home.
So for example, lets say I have a rule in the controller that sends my wife a text message when I arrive HOME (Flag in the controller gets set to true when I arrive).
Now in SPACE if I am already HOME, and SPACE crashes or is forced close (or perhaps closes due to memory management issues in the phone) - when SPACE opens SPACE sets the FLAG to true and triggers the event again as if I am arriving home. This can happen several times a day without me crossing into the Geo Region.
This problem did not happen with HAUKI.
Hopefully it can be addressed in SPACE.
Thanks,
Jim
In SPACE when the APP opens (after previously crashing or force close) the geofence action fires even when you are already home.
So for example, lets say I have a rule in the controller that sends my wife a text message when I arrive HOME (Flag in the controller gets set to true when I arrive).
Now in SPACE if I am already HOME, and SPACE crashes or is forced close (or perhaps closes due to memory management issues in the phone) - when SPACE opens SPACE sets the FLAG to true and triggers the event again as if I am arriving home. This can happen several times a day without me crossing into the Geo Region.
This problem did not happen with HAUKI.
Hopefully it can be addressed in SPACE.
Thanks,
Jim
lupinglade
Senior Member
This will be fixed in the next update.jlipsit said:
This issue is related to Smart Triggers and Flags.
I have a flag named "Dad Home"
I set up a Smart trigger to turn on the "Dad Home" flag based on my Geographic Region.
I set my HAI Panel to send me a text message "Dad Is Almost Home" when the "Dad Home" flag goes on.
My Problem is that Every time I open the SPACE app (while I am Home), it turns on the "Dad Home" flag, even if the flag is already on. This produces another Text message to my phone of "Dad is almost home".
Is there a way to tell the Space App NOT TO turn on a flag that is already on? And vice versa, don't shut off a flag if it is already off?
http://youtu.be/fu3RyN9XHZ8
I have a flag named "Dad Home"
I set up a Smart trigger to turn on the "Dad Home" flag based on my Geographic Region.
I set my HAI Panel to send me a text message "Dad Is Almost Home" when the "Dad Home" flag goes on.
My Problem is that Every time I open the SPACE app (while I am Home), it turns on the "Dad Home" flag, even if the flag is already on. This produces another Text message to my phone of "Dad is almost home".
Is there a way to tell the Space App NOT TO turn on a flag that is already on? And vice versa, don't shut off a flag if it is already off?
http://youtu.be/fu3RyN9XHZ8
lupinglade
Senior Member
1.05 will fix this. It's odd that it sends the text message even if the flag is already on, but we can correct that on our end.fdnyfish said:
lupinglade
Senior Member
Only using an iBeacon currently. You would not get the needed accuracy without it.fdnyfish said:
lupinglade
Senior Member
On the main screen, swipe to show more options. The musical note icon will take you to the Music section.rugao123 said:
lupinglade
Senior Member
Its not yet possible, but we'll add this optionwdeertz said:
lupinglade said:
I am using a Foscam MJPEG 8905W camera and I have it set to "Foscam" in Space. In Omni's extended setup it is set to a MJPEG camera because Foscam is not in the list of available camera models in PCAccess.
1) The iPad (the only one I have for now) for the one and only controller I have has "Touchscreen 0" in the Omni controller settings (with no way to change it)
2) In the Omni Automation, touchscreens start their numbering sequence at 1, not 0. So I can't select Touchscreen #0 on which to display a camera on the iPad screen.
3) Also, the settings for the Action->Run Button don't always "stick." I.E. the button name gets wiped out or if I clear it doesn't always stay cleared. I haven't figured out exactly what steps causes this yet.
4) This camera has a maximum frame rate of 30fps. However I can only set it up to a maximum of 20fps in PCAccess. How do I tell Space to run it at 30fps?
5) Where is the camera info being pulled from? Is it from the setup within Space or from the Omni Extended setup section or some of both?
6) Under advanced setup in Space "Camera Type" is listed as "Extended Setup" and the field can not be edited.
7) I entered the URLs of two Demo cameras at Foscam headquarters. When the camera screen appears the order of the cameras on the screen changes each time I access it. Sometimes the two Foscam Demos appear first, sometimes the local Foscam camera appears first.
Any help would be appreciated.
Thanks!
Similar threads
