Wayne-Dalton introduces new Z-Wave Thermostat

electron

Administrator
Staff member
MT. HOPE, OH – Wayne-Dalton’s Home Access and Controls Division introduces its new Z-Wave® Thermostat, the latest addition to its Home Controls products line. The new Wayne-Dalton thermostat is a Z-Wave® fully compatible component that takes home automation to a new level.

“We are excited to bring this new home control technology to the marketplace,” said Jeff Franklin, Executive Vice President of Wayne-Dalton. “The unit is easy to install, easy to use and surprisingly affordable, making it a unique product that stands out in the relatively new arena of remote programmable thermostats.”

The Wayne-Dalton thermostat allows homeowners to manage their heating and cooling needs with the push of a button. Temperature control can be accessed through front panel buttons on the unit itself or remotely from any Z-Wave® enabled remote control, computer or cell phone. The unit offers simple to activate “green” energy conservation and normal mode pre-set temperatures.

Unique Features:
  • The Wayne-Dalton thermostat is the only thermostat today that is fully compatible with every Z-Wave® remote in the marketplace.
  • The Wayne-Dalton thermostat is designed for easy installation. No special wiring or additional boxes needed, and the component is compatible with over 90% of existing HVAC units found in homes today.
  • Outfitted with a battery back-up, the Wayne-Dalton thermostat works off the existing HVAC’s power, requiring no additional power supply.

Homeowners love the Wayne-Dalton thermostat because:
  • It is the most user-friendly thermostat available. The thermostat controls are easy to understand, and the unit uses the same interface as any other Z-Wave® product a homeowner may be using. No need to learn a new system.
  • It maximizes a homeowner’s energy savings through its simple and flexible “green” energy conservation mode. The ability to set this mode with a single button and make adjustments remotely allows homeowners to change their temperature schedules to meet their daily needs, without losing the energy efficiency that overriding a system commonly causes.
  • It offers convenient computer and cell phone access. The ability to control their home network through the Internet or with a cell phone allows homeowners to change settings even from far distances that traditional remote controls cannot reach.
  • It is the most affordable Z-Wave® enabled thermostat available. At a price point anywhere from $50 to $250 below its competitors, the Wayne-Dalton thermostat is an affordable and efficient option for most homeowners.

During a recent Architect Summit held at Wayne-Dalton’s World Headquarters in Mt. Hope, Ohio, prominent architects were invited to tour the facility and learn about the latest trends and advances in technology. Architect Jim Wells of Atlanta Plan Source, Inc. was impressed with the Z-Wave® thermostat and other home controls products featured in the Wayne-Dalton prototype house of the future.

“The Z-Wave® technology was eye-opening for me,” said Wells. “It makes it so easy to link everything together to work for the way people live – with the hit of one button. It can definitely benefit me as a designer, as well as a homeowner.”

The Wayne-Dalton Z-Wave® thermostat is the most recent addition to the company’s Home Controls Solutions line. Through these compatible, interactive products, homeowners can access their entire home from various touch points throughout their house, from their vehicle, and even from a remote vacation location.

Wayne-Dalton offers an exclusive, innovative idrive® Z-Wave® enabled garage door opener, which allows the homeowner to control their home’s lighting and HVAC system from their remote garage door opener. With Wayne-Dalton Home Controls Solutions, home automation has never been this affordable and easy to use.

About Wayne-Dalton

About 70 miles south of Cleveland lay Holmes County and Mt. Hope, Ohio, a picturesque farming community steeped in Amish tradition. There's a hardware store, a post office, an auction barn, a handful of neatly kept homes, thousands of acres of rolling farmland, and one world-class garage door and opener company.

Since 1954, Wayne-Dalton has been recognized for engineering the most innovative garage door products in the marketplace. From the development of energy efficient insulated garage doors to the revolutionary TorqueMaster ™ counterbalance safety system to the most recent home automation products, Wayne-Dalton is a world leader in the garage door and garage door opener industry.
 
HomeSeer has been selling these for a few weeks here:
http://store.homeseer.com/store/WDTC-20---...on-P599C38.aspx
The only draw back is the fan mode is not remotely selectable.

Any reason this wouldn't work on a heat pump with emergency electric back-up?
The Instruction Manual is linked to the bottom of this HomeSeer page.
http://store.homeseer.com/store/WDTC-20---...on-P599C38.aspx

Read the manaul and had to call Wayne Dalton tech support for clarification on the emergency heat jumper. Because I am in a fairly cold climate during the winter months I would have to manully set the jumper to use the emergency heat right away and bypass the 1st stage of heat. Seems not too automated to have to set the jumper manually. Would love to see that remotely configurable. I must say that the support call was quick and painless as I came away with the info I needed in under a couple of minutes.

Haven't completely ruled this thermostat out, but looking for alternatives at this point.
 
I would have to manully set the jumper to use the emergency heat right away and bypass the 1st stage of heat. Seems not too automated to have to set the jumper manually. Would love to see that remotely configurable.


couldnt you use an automated relay of some sort.. all a jumper is a short????? there has to be a way... :)
 
I would have to manully set the jumper to use the emergency heat right away and bypass the 1st stage of heat. Seems not too automated to have to set the jumper manually. Would love to see that remotely configurable.


couldnt you use an automated relay of some sort.. all a jumper is a short????? there has to be a way... :)


Possibly, however one must also press the reset button on the thermostat after any jumpers changes are made to reflect the changes.
 
Back
Top