*** Adding few more components to the build.

[Mp333]

Looking to add few more component to the build. Just wondering if I am overseeing any details. Currently I have the following installed.

• ELK-M1GKS M1 Gold Control Kit with 28” Enclosure
  M1 Gold Control Board
• ELK-M1KP LCD Keypad
• ELK-M1KPNAV LCD Keypad
• ELK-1280 8Ah Battery
• ELK-TRG1640 AC Transformer
• ELK-73 Echo Paintable Interior Speaker

[*]ELK-M1XEP Ethernet Interface
[*]ELK M1XIN 16 Zone Input Expander
[*]2WTA-B System Sensor Smoke Detector
[*]RRS-MOD System Sensor reversing relay/synchronization module
[*]Napco  IQ Profiler Motion Detector (Came with the house. Need to replace them as they are not sensitive even on high sensitive setting. Looking for a recommendation for 20 to 40 ft.)

 
Looking to order the following for Phase 2.

 

• ELK-M1DBH M1 Data Bus Hub (Assuming I can terminate stranded wire to RJ45 connector. Thoughts?)
• OR ELK-M1DBHR (If I cant terminate RJ45. Current wires are bare…)
• ELK-PD9 Power Distribution
• ELK-SWG Glide for PD9
• ELK-TRG1640 16.5VAC Transformer to power PD9.

GSM kit below will be mounted on 20ft away from M1G in a 11x12x3 Enclosure I already have.

• UPLINK 4500EZ
• UPLINNK 4500CAB Serial cable for RS232 M1XSP
• ELK-M1XSP Serial Port Expander for 4500EZ
• ELK-SWG Glide for XSP
• ELK-P624 Power supply/ Charger
• ELK-TRG1640 16.5VAC Transformer
• ELK-1250 12V 5Ah Sealed Lead Acid Battery

Thanks