Another 3D printing question

dwalt

Active Member
How difficult would it be to 3D print the mounting plate for LTe/2e/Pro2? I know a few things would change like the tabs that could be bent for use in the OnQ low voltage enclosures. The other problem would be the screw mounts. I'm guessing they could be left as a post, then I could predrill them and use a self-tapping screw? It could be made thicker than the metal one which might make it stronger. There were a couple of different styles that OnQ made. One of the older ones might be easier... The older OnQ one is flat, OnQ part number 364278-01. The newer one (HAI 20A07-2) is raised up so the board is away from the back of the enclosure. I could send the OnQ one to anyone that wanted to make a template.
 

Attachments

  • OnQ mount rotate.jpg
    OnQ mount rotate.jpg
    75.2 KB · Views: 9
Back
Top