Enroll the M1XEP into the Control. Using the keypad, access the Installation Programming menu (Menu 9).Choose Bus Module Enrollment (Menu 1) and press the right arrow key to start the enrollment. When the enroll-ment is complete press the ELK or * (Asterisk) key to exit.
M1XEP does not connect to the RS-485 data bus on the control, therefore it will not appear
in the list of devices enrolled on the keypad. However, the enrollment process is necessary toensure proper supervision of the device. If the M1XEP is removed, it must be "un-enrolled" bycompleting the Bus Module Enrollment process to prevent an "Ethernet Trouble" from occurring.ElkRP versions 1.6.2 and later will display the current firmware, hardware, and bootware versionsof the M1XEP on the " Show KPs and Expanders" screen. This screen is accessed from the Send/Rcv menu when connected to the control.