johnnynine
Active Member
How can I prevent the voice amplifier from turning on when switching from stay mode to night mode.
If the home is in stay mode and I currently press stay again to place the system in night mode, the voice amplifier turns on and the system speaks. I do not want either of these to happen because I have the Elk M1 hooked into the intercom system and don't want to wake anyone up that may already sleeping.
I did create a rule that was something like... whenever alarm is set to night mode, turn off non-alarm voices. That did prevent the Elk from speaking, but the Elk still turned on the amplifier, which produces a pop in the intercom system (for reasons I won't go into here). But this pop will wake a person up.
The only thing I can think of is creating a function key task that turns off non-alarm voices. This button could then be pressed at any time between pressing stay mode and night mode.
Any other ideas?
If the home is in stay mode and I currently press stay again to place the system in night mode, the voice amplifier turns on and the system speaks. I do not want either of these to happen because I have the Elk M1 hooked into the intercom system and don't want to wake anyone up that may already sleeping.
I did create a rule that was something like... whenever alarm is set to night mode, turn off non-alarm voices. That did prevent the Elk from speaking, but the Elk still turned on the amplifier, which produces a pop in the intercom system (for reasons I won't go into here). But this pop will wake a person up.
The only thing I can think of is creating a function key task that turns off non-alarm voices. This button could then be pressed at any time between pressing stay mode and night mode.
Any other ideas?