RandyKnight
Active Member
I'm trying to bench test my smokes before installation and don't have something connected and/or configured right. The smoke is a DSC FS-410. It has 5 screw contacts on it. From the diagram it looks like the 5th one is to daisy chain the power. I've got the Pos/Neg SAUX from the M1 connected to the Pos/Neg terminals on the smoke and show 13.8V there. The other 2 screws are labeled NO and COM. They are connected to the M1 Zone 1 and it's negative. I've tried switching those but still get "fire trouble" when I power up the Elk. I also see nothing on the LED on the smoke.
Any help would be appreciated.
Any help would be appreciated.