Hello new guy on the Forum. I was hoping that someone had seen a similar issue to the one I am facing.
Back in November the communicator started failing to communicate through the Alula cellular interface.
The Alula Bat will not relay to Alula. (Communicator Error Logged)
Here is what I have done so far.
OMNI Pro II 4.0b
Reset RAM/NVRAM and reloaded system.
Tested dialer to my cell phone (Pass)
Tested connection directly to Central station, bypassing Alula BAT (PBX SMDR report shows successful connection to Central Station and panel shows no communicator error, but central station indicates no received signal)
It seems like the Contact ID is not formatting correctly?
Back in November the communicator started failing to communicate through the Alula cellular interface.
The Alula Bat will not relay to Alula. (Communicator Error Logged)
Here is what I have done so far.
OMNI Pro II 4.0b
Reset RAM/NVRAM and reloaded system.
Tested dialer to my cell phone (Pass)
Tested connection directly to Central station, bypassing Alula BAT (PBX SMDR report shows successful connection to Central Station and panel shows no communicator error, but central station indicates no received signal)
It seems like the Contact ID is not formatting correctly?