Hi,
I have been running a Rain8 sprinkler controller with my HAI Omni Pro for 2 years with the following programming that was suggested by Rain 8 people.
But the problem is if I try to turn off one zone, it will go down the sequence and turn on the next zone. So I have to keep turning off zones until it reaches the end.
Also I have not been able to program a ONE button Shut all sprinklers command.
Any help would be much appreciated.
Here is the programming I currently have:
I have been running a Rain8 sprinkler controller with my HAI Omni Pro for 2 years with the following programming that was suggested by Rain 8 people.
But the problem is if I try to turn off one zone, it will go down the sequence and turn on the next zone. So I have to keep turning off zones until it reaches the end.
Also I have not been able to program a ONE button Shut all sprinklers command.
Any help would be much appreciated.
Here is the programming I currently have:
Code:
1. WHEN SPRINK START: SPRINKLER 1 ON FOR 10 MINUTES
2. WHEN SPRINKLER 1 OFF: SPRINK 1 TMR ON FOR 1 SECOND
3. WHEN SPRINK 1 TMR OFF: SPRINKLER 2 ON FOR 10 MINUTES
4. WHEN SPRINKLER 2 OFF: SPRINK 2 TMR ON FOR 1 SECOND
5. WHEN SPRINK 2 TMR OFF: SPRINKLER 3 ON FOR 10 MINUTESS
6. WHEN SPRINKLER 3 OFF: SPRINK 3 TMR ON FOR 1 SECOND
7. WHEN SPRINK 3 TMR OFF: SPRINKLER 4 ON FOR 10 MINUTES
8. WHEN SPRINKLER 4 OFF: SPRINK 4 TMR ON FOR 1 SECOND
9. WHEN SPRINK 4 TMR OFF: SPRINKLER 5 ON FOR 10 MINUTES
10. WHEN SPRINKLER 5 OFF: SPRINK 5 TMR ON FOR 1 SECOND
11. WHEN SPRINK 5 TMR OFF: SPRINKLER 6 ON FOR 10 MINUTES
12. WHEN SPRINKLER 6 OFF: SPRINK 6 TMR ON FOR 1 SECOND
13. WHEN SPRINK 6 TMR OFF: SPRINKLER 7 ON FOR 10 MINUTES
14. WHEN SPRINKLER 7 OFF: SPRINK 7 TMR ON FOR 1 SECOND
15. WHEN SPRINK 7 TMR OFF: SPRINKLER 8 ON FOR 10 MINUTES