Steve
Senior Member
Question for the intrusion sensor experts. On windows I have wired alarm screens on the bottom and on the top I either have the glass mount Sentrol sensor or on windows that are 'divided' I have older Ultrak vibration/shock sensors mounted on the frame which are fed into an MA-350 shock analyzer. This system was put in and based on technology 13 years ago.
When I replace system with the M1 I would like to simplify things a bit, meaning I would like to eliminate the MA-350's and associated wiring. What would be the best to replace them. I guess 1 choice is an acoustical breakage sensor but I thought they were prone to falsing (at least what I've heard in the past), or what about something like these: http://www.sentrol.com/products/PRD_Det_ab...=5400&ListID=15 They seem similar to the Ultrak's but without the separate analyzer. What would be your recommendations - one of these or other? Thanks!
When I replace system with the M1 I would like to simplify things a bit, meaning I would like to eliminate the MA-350's and associated wiring. What would be the best to replace them. I guess 1 choice is an acoustical breakage sensor but I thought they were prone to falsing (at least what I've heard in the past), or what about something like these: http://www.sentrol.com/products/PRD_Det_ab...=5400&ListID=15 They seem similar to the Ultrak's but without the separate analyzer. What would be your recommendations - one of these or other? Thanks!