richrpilot
New Member
Hello all;
I have and M1G system which after 6 years of trouble-free operation has developed an issue that I need help running down. The problem is that the keypads beep intermittently when the system is armed stay, usually at odd hours that really disturb sleep. When they beep, it is constant beeping and there is no indication on the lcd keypad or in the ELKRP log. Sometime the 2 lcd keypads will stop beeping after 20 seconds or so, but I always have to clear the MKpas keypads with the * key. I have checked voltage, and have shut the system off and checked resistance. All seems to be within appropriate ranges. I have 4 keypads each on home runs to an M1DBHR. 2 are M1KPAS and 2 are M!KP_LCD. I have looked for rodent chews but find nothing. My next steps are to disconnect the keypads one by one to see if one of them is causing the issue. If nothing there, I will disconnect the M!DBHR and connect a keypad directly to the M1G. Any suggestions will be appreciated. Also,
-will it be sufficient to just take out the keypads in ELKRP or do you think I should physically disconnect them?
-How else might I get to the bottom of this issue?
Thanks
I have and M1G system which after 6 years of trouble-free operation has developed an issue that I need help running down. The problem is that the keypads beep intermittently when the system is armed stay, usually at odd hours that really disturb sleep. When they beep, it is constant beeping and there is no indication on the lcd keypad or in the ELKRP log. Sometime the 2 lcd keypads will stop beeping after 20 seconds or so, but I always have to clear the MKpas keypads with the * key. I have checked voltage, and have shut the system off and checked resistance. All seems to be within appropriate ranges. I have 4 keypads each on home runs to an M1DBHR. 2 are M1KPAS and 2 are M!KP_LCD. I have looked for rodent chews but find nothing. My next steps are to disconnect the keypads one by one to see if one of them is causing the issue. If nothing there, I will disconnect the M!DBHR and connect a keypad directly to the M1G. Any suggestions will be appreciated. Also,
-will it be sufficient to just take out the keypads in ELKRP or do you think I should physically disconnect them?
-How else might I get to the bottom of this issue?
Thanks