flbbon4123
Member
BraveSirRobbin,
Unfortunately, I can't get any picture of the kitchen window to show the gap properly.
I have repositioned the kitchen window magnet and the system will now arm normally.
I have done the ohms testing with the following results:
1) Kitchen window, Closed = 0.02 to 0.03 ohms, Open = 1 (infinity)
2) Great Room window, Closed = 0.01 to 0.02 ohms, Open = 1 (infinity)
I am thinking the difference is likely due to distance from the panel.
The Kitchen window is approx. 22 ft. from the panel and the Great Room is only 12 ft.
All window sensors are "normally closed".
I have rattled both windows while armed and no violation.
I am thinking I will order a few wide gap sensors as you have noted and see if this makes any difference.
I am still trying to understand why I would suddenly have this problem.
Is there any way to test and see if the problem is moisture related?
Unfortunately, I can't get any picture of the kitchen window to show the gap properly.
I have repositioned the kitchen window magnet and the system will now arm normally.
I have done the ohms testing with the following results:
1) Kitchen window, Closed = 0.02 to 0.03 ohms, Open = 1 (infinity)
2) Great Room window, Closed = 0.01 to 0.02 ohms, Open = 1 (infinity)
I am thinking the difference is likely due to distance from the panel.
The Kitchen window is approx. 22 ft. from the panel and the Great Room is only 12 ft.
All window sensors are "normally closed".
I have rattled both windows while armed and no violation.
I am thinking I will order a few wide gap sensors as you have noted and see if this makes any difference.
I am still trying to understand why I would suddenly have this problem.
Is there any way to test and see if the problem is moisture related?