*** Short J-16 Jumper cable for M1RB

[Mp333]

Looking for a short 5" or so jumper for the M1RB relay board that connects to J16 on m1g. The supplied one is way too long for my app. Wondering where you could get one?
 
 

 

[gatchel]

We have discussed this in another thread and not much was found on a part number of even the original cable assembly. My guess is that you could pick one end, pop out the terminals and rework the connections and make the cable shorter that way.
 
You could cut the cable and solder the wires together.
 
You could get creative with some wire ties or panduit and clean it up that way.

 

[Sokoloff]

You can buy the crimps from an electrical supplier (Newark, Mouser, Digikey, etc), cut the cable, crimp new ends on it and re-insert them into the housing. The actual work on the bench would be under 15 minutes. 
 
Finding and ordering exactly the right crimp terminals will take you longer, which is why I figured them out once long-ago and bought 1000 of them. (but for multiple different types of connectors, so I still need to figure out which is which, but now I'm just picking from among a handful of choices, one of which I know is right, not a whole catalog.)