I have recently bought a Billion wireless router (7404VGO) and seem to be loosing packets but only when I connect to the M1. I am connected to a M1 via ELKRP XEP ethernet adaptor. I can connect no problems to the unit but when I request a send all or recieve all from the M1 system the Billion doesn't handle the transfer and times out the system. If I use the system to set and save changes no problems or timeouts. I am also getting the connection dropping out quite frequently with Billion where before with the Belkin was Ok.
I can connect via a crossover cable to M1 system no problem.
I can reinstall the old Belkin Pre-N router instead of the Billion ans no problems. (I bought the Billion so I could have VOIP)
If I ping the IP of the M1 I am getting large timing variations 1ms to 85mS with timeouts frequenty with the Billion. If I put the Belkin in I get a 1ms to 2ms variation and no time outs. If I send all or recieve all the ELKRP times out with the Billion but the Belkin doesn't miss a beat.
I have the most recent driver for the Billion installed and all the current ELK.
I would appreciate any thoughts and suggestions.
One of those everthing works Ok except in this combinations!
Cheers,
Fleetz
I can connect via a crossover cable to M1 system no problem.
I can reinstall the old Belkin Pre-N router instead of the Billion ans no problems. (I bought the Billion so I could have VOIP)
If I ping the IP of the M1 I am getting large timing variations 1ms to 85mS with timeouts frequenty with the Billion. If I put the Belkin in I get a 1ms to 2ms variation and no time outs. If I send all or recieve all the ELKRP times out with the Billion but the Belkin doesn't miss a beat.
I have the most recent driver for the Billion installed and all the current ELK.
I would appreciate any thoughts and suggestions.
One of those everthing works Ok except in this combinations!
Cheers,
Fleetz