Want to add a heat detector in the garage and am wondering if I should avoid rate of rise so temp swings don't set it off - for example if I pull in with a warm car in cold weather or open the door to the house. And What about using 194 degree to lessen chance of false triggering?
Considered ones near the wood stove and in the attic too. Will probably just do the attic since there is a smoke alarm across the room from the wood stove. Ibviously need 194 temp in the attic.
Seems like a lot of heat detectors also have rate of rise. I did find Edwards 283/284 models that don't. Any other recommended models?
It looks like I could put this on the same zone as 4 wire smokes. Any complications if I put on a separate zone? Will both zones trigger the sounders in the smokes via the reversing relay on the smoke zone?
Considered ones near the wood stove and in the attic too. Will probably just do the attic since there is a smoke alarm across the room from the wood stove. Ibviously need 194 temp in the attic.
Seems like a lot of heat detectors also have rate of rise. I did find Edwards 283/284 models that don't. Any other recommended models?
It looks like I could put this on the same zone as 4 wire smokes. Any complications if I put on a separate zone? Will both zones trigger the sounders in the smokes via the reversing relay on the smoke zone?